Danke für die Hinweise, aber ich glaube, ich bin zu blöd..........
Hier meine config.php von SPAW:
<?php
// changes for pragmaMx
// Bridge-File includen
// ob_start();
require_once(dirname(__FILE__) . '/../mx_bridge.php');
// ob_end_clean();
// //////////////////////////////////////////
// END changes for pragmaMx
require_once(str_replace('\\\\', '/', dirname(__FILE__)) . '/../class/config.class.php');
require_once(str_replace('\\\\', '/', dirname(__FILE__)) . '/../class/util.class.php');
// sets physical filesystem directory of web site root
// if calculation fails (usually if web server is not apache) set this manually
SpawConfig::setStaticConfigItem('DOCUMENT_ROOT', str_replace("\\", "/", SpawVars::getServerVar("DOCUMENT_ROOT")));
if (!ereg('/$', SpawConfig::getStaticConfigValue('DOCUMENT_ROOT')))
SpawConfig::setStaticConfigItem('DOCUMENT_ROOT', SpawConfig::getStaticConfigValue('DOCUMENT_ROOT') . '/');
// sets physical filesystem directory where spaw files reside
// should work fine most of the time but if it fails set SPAW_ROOT manually by providing correct path
SpawConfig::setStaticConfigItem('SPAW_ROOT', str_replace("\\", "/", realpath(dirname(__FILE__) . "/..") . '/'));
// sets virtual path to the spaw directory on the server
// if calculation fails set this manually
SpawConfig::setStaticConfigItem('SPAW_DIR', '/' . str_replace(SpawConfig::getStaticConfigValue("DOCUMENT_ROOT"), '', SpawConfig::getStaticConfigValue("SPAW_ROOT")));
/*
// semi-automatic path calculation
// comment the above settings of DOCUMENT_ROOT, SPAW_ROOT and SPAW_DIR
// and use this block if the above fails.
// set SPAW_DIR manually. If you access demo page by http://domain.com/spaw2/demo/demo.php
// then set SPAW_DIR to /spaw2/
SpawConfig::setStaticConfigItem('SPAW_DIR', '/spaw2/');
// and the following settings will be calculated automaticly
SpawConfig::setStaticConfigItem('SPAW_ROOT', str_replace("\\","/",realpath(dirname(__FILE__)."/..").'/'));
SpawConfig::setStaticConfigItem('DOCUMENT_ROOT', substr(SpawConfig::getStaticConfigValue('SPAW_ROOT'),0,strlen(SpawConfig::getStaticConfigValue('SPAW_ROOT'))-strlen(SpawConfig::getStaticConfigValue('SPAW_DIR'))));
*/
/*
// under IIS you will probably need to setup the above paths manually. it would be something like this
SpawConfig::setStaticConfigItem('DOCUMENT_ROOT', 'c:/inetpub/wwwroot/');
SpawConfig::setStaticConfigItem('SPAW_ROOT', 'c:/inetpub/wwwroot/spaw2/');
SpawConfig::setStaticConfigItem('SPAW_DIR', '/spaw2/');
*/
// DEFAULTS used when no value is set from code
// language
SpawConfig::setStaticConfigItem('default_lang', 'en');
// output charset (empty strings means charset specified in language file)
SpawConfig::setStaticConfigItem('default_output_charset', '');
// theme
SpawConfig::setStaticConfigItem('default_theme', 'spaw2');
// toolbarset
SpawConfig::setStaticConfigItem('default_toolbarset', $my_wyscnf['toolbar']);
// stylesheet
SpawConfig::setStaticConfigItem('default_stylesheet', SpawConfig::getStaticConfigValue('SPAW_DIR') . 'wysiwyg.css');
// width
SpawConfig::setStaticConfigItem('default_width', '100%');
// height
SpawConfig::setStaticConfigItem('default_height', '200px');
// specifies if language subsystem should use iconv functions to convert strings to the specified charset
SpawConfig::setStaticConfigItem('USE_ICONV', true);
// specifies rendering mode to use: "xhtml" - renders using spaw's engine, "builtin" - renders using browsers engine
SpawConfig::setStaticConfigItem('rendering_mode', 'xhtml', SPAW_CFG_TRANSFER_JS);
// specifies that xhtml rendering engine should indent it's output
SpawConfig::setStaticConfigItem('beautify_xhtml_output', true, SPAW_CFG_TRANSFER_JS);
// specifies host and protocol part (like http://mydomain.com) that should be added to urls returned from file manager (and probably other places in the future)
SpawConfig::setStaticConfigItem('base_href', '', SPAW_CFG_TRANSFER_JS);
// specifies if spaw should strip domain part from absolute urls (IE makes all links absolute)
SpawConfig::setStaticConfigItem('strip_absolute_urls', true, SPAW_CFG_TRANSFER_JS);
// specifies in which directions resizing is allowed (values: none, horizontal, vertical, both)
SpawConfig::setStaticConfigItem('resizing_directions', 'vertical', SPAW_CFG_TRANSFER_JS);
// specifies that special characters should be converted to the respective html entities
SpawConfig::setStaticConfigItem('convert_html_entities', false, SPAW_CFG_TRANSFER_JS);
$stylefile = '../themes/' . WYSIWYG_THEME . '/style/style.css';
$stylefile_abs = @realpath(dirname(dirname(__FILE__)) . '/' . $stylefile); // wird evtl. noch zum auslesen der Datei benoetigt!!!
if ($stylefile_abs) {
$stylefile = SpawConfig::getStaticConfigValue('SPAW_DIR') . $stylefile;
// var_dump($stylefile, $stylefile_abs);
SpawConfig::setStaticConfigItem('default_stylesheet', $stylefile);
$style_list = mxSpawGetStyleContent($stylefile_abs);
// data for style (css class) dropdown list
SpawConfig::setStaticConfigItem("dropdown_data_core_style", $style_list);
/* Original:
SpawConfig::setStaticConfigItem("dropdown_data_core_style",
array('' => 'Normal',
'style1' => 'Style No.1',
'style2' => 'Style No.2',
)
);
*/
// data for style (css class) dropdown in table properties dialog
SpawConfig::setStaticConfigItem("table_styles", $style_list);
/* Original:
SpawConfig::setStaticConfigItem("table_styles",
array('' => 'Normal',
'style1' => 'Style No.1',
'style2' => 'Style No.2',
)
);
*/
// data for style (css class) dropdown in table cell properties dialog
SpawConfig::setStaticConfigItem("table_cell_styles", $style_list);
/* Original:
SpawConfig::setStaticConfigItem("table_cell_styles",
array('' => 'Normal',
'style1' => 'Style No.1',
'style2' => 'Style No.2',
)
);
*/
}
// data for style (css class) dropdown in image properties dialog
SpawConfig::setStaticConfigItem("image_styles",
array('' => 'Normal',
'style1' => 'Style No.1',
'style2' => 'Style No.2',
)
);
// data for fonts dropdown list
SpawConfig::setStaticConfigItem("dropdown_data_core_fontname", array_flip($my_wyscnf['fontfamily']));
/* Original:
SpawConfig::setStaticConfigItem("dropdown_data_core_fontname",
array('Arial' => 'Arial',
'Courier' => 'Courier',
'Tahoma' => 'Tahoma',
'Times New Roman' => 'Times',
'Verdana' => 'Verdana'
)
);
*/
// data for fontsize dropdown list
SpawConfig::setStaticConfigItem("dropdown_data_core_fontsize",
array('1' => '1',
'2' => '2',
'3' => '3',
'4' => '4',
'5' => '5',
'6' => '6'
)
);
// data for paragraph dropdown list
SpawConfig::setStaticConfigItem("dropdown_data_core_formatBlock",
array('Normal' => 'Normal',
'<H1>' => 'Heading 1',
'<H2>' => 'Heading 2',
'<H3>' => 'Heading 3',
'<H4>' => 'Heading 4',
'<H5>' => 'Heading 5',
'<H6>' => 'Heading 6',
'<pre>' => 'Preformatted',
'<address>' => 'Address',
'<p>' => 'Paragraph'
)
);
// data for link targets drodown list in hyperlink dialog
SpawConfig::setStaticConfigItem("a_targets",
array('_self' => 'Self',
'_blank' => 'Blank',
'_top' => 'Top',
'_parent' => 'Parent'
)
);
// data for quick links dropdown (new in 2.0.6)
SpawConfig::setStaticConfigItem("quick_links",
array(
'http://www.pragmamx.org/' => 'pragmaMx Homepage',
'http://www.pragmamx.org/Forum.html' => 'pragmaMx Support Forum',
'http://spaweditor.com/' => 'SPAW Editor',
'http://forums.solmetra.com/' => 'SPAW Support Forums',
'http://blog.solmetra.com/' => 'Solmetra\'s Developer Blog'
),
SPAW_CFG_TRANSFER_SECURE
);
// toolbar sets (should start with "toolbarset_"
// standard core toolbars
SpawConfig::setStaticConfigItem('toolbarset_standard',
array("format" => "format",
"style" => "style",
"edit" => "edit",
"table" => "table",
"plugins" => "plugins",
"insert" => "insert",
"tools" => "tools"
)
);
// all core toolbars
SpawConfig::setStaticConfigItem('toolbarset_all',
array("format" => "format",
"style" => "style",
"edit" => "edit",
"table" => "table",
"plugins" => "plugins",
"insert" => "insert",
"tools" => "tools",
"font" => "font"
)
);
// mini core toolbars
SpawConfig::setStaticConfigItem('toolbarset_mini',
array("format" => "format_mini",
"edit" => "edit",
"tools" => "tools"
)
);
// colorpicker config
SpawConfig::setStaticConfigItem('colorpicker_predefined_colors',
array('black',
'silver',
'gray',
'white',
'maroon',
'red',
'purple',
'fuchsia',
'green',
'lime',
'olive',
'yellow',
'navy',
'blue',
'#fedcba',
'aqua'
),
SPAW_CFG_TRANSFER_SECURE
);
// changes for pragmaMx
// SpawFm plugin config:
// global filemanager settings
SpawConfig::setStaticConfigItem('PG_SPAWFM_SETTINGS',
array('allowed_filetypes' => $my_wyscnf['filetype'], // allowed filetypes groups/extensions
'allow_modify' => $my_wyscnf['allow_modify'], // allow edit filenames/delete files in directory
'allow_upload' => $my_wyscnf['allow_upload'], // allow uploading new files in directory
'chmod_to' => octdec($my_wyscnf['chmod_to']), // change the permissions of an uploaded file if allowed
'chmod_dir_to' => octdec($my_wyscnf['chmod_dir_to']), // pragmaMx spezific: change the permissions of an new created directory
// (see PHP chmod() function description for details), or comment out to leave default
'max_upload_filesize' => $my_wyscnf['upload_max_size'], // max upload file size allowed in bytes, or 0 to ignore
'max_img_width' => $my_wyscnf['max_img_width'], // max uploaded image width allowed, or 0 to ignore
'max_img_height' => $my_wyscnf['max_img_height'], // max uploaded image height allowed, or 0 to ignore
'recursive' => WYSIWYG_IS_ADMIN, // allow using subdirectories
'allow_modify_subdirectories' => WYSIWYG_IS_ADMIN_SUPER, // allow renaming/deleting subdirectories
'allow_create_subdirectories' => WYSIWYG_IS_ADMIN_SUPER, // allow creating subdirectories
'forbid_extensions' => array('php', 'htm', 'html'), // disallow uploading files with specified extensions
'forbid_extensions_strict' => true, // disallow specified extensions in the middle of the filename
),
SPAW_CFG_TRANSFER_SECURE
);
/* Konfiguration der im Dateimanager verfuegbaren Pfade */
/* pragmaMx Rootordner zwischenspeichern */
$tmp_pmxdir = dirname(SpawConfig::getStaticConfigValue('SPAW_DIR'));
/* Die Smilies */
$tmp_directories[] = array('dir' => $tmp_pmxdir . '/images/smilies/',
'caption' => 'Smilies ',
'params' => array(
'default_dir' => false, // set directory as default (optional setting)
'allowed_filetypes' => array('images'),
'allow_upload' => false,
)
);
/* Wenn der alte iUpload Ordner vorhanden ist, diesen auch mit anbieten */
if (@file_exists(dirname(__FILE__) . '/../../images/iupload')) {
$tmp_directories[] = array('dir' => $tmp_pmxdir . '/images/iupload/',
'caption' => 'images/iupload',
'params' => array(
'default_dir' => false, // set directory as default (optional setting)
'allowed_filetypes' => array('images'),
)
);
}
/* den neuen/aktuellen Bildordner als Standard verwenden */
$tmp_directories[] = array('dir' => $tmp_pmxdir . '/media/images/',
'caption' => 'media/images',
'params' => array(
'default_dir' => true, // set directory as default (optional setting)
'allowed_filetypes' => array('images'),
)
);
/* Ordner fuer Flash Filme */
$tmp_directories[] = array('dir' => $tmp_pmxdir . '/media/flash/',
'caption' => 'media/flash',
'params' => array(
'default_dir' => false, // set directory as default (optional setting)
'allowed_filetypes' => array('flash'),
)
);
/* Ordner fuer alle anderen Dateien */
$tmp_directories[] = array('dir' => $tmp_pmxdir . '/media/files/',
'caption' => 'media/files',
'params' => array(
'default_dir' => false, // set directory as default (optional setting)
'allowed_filetypes' => array('documents', 'audio', 'video', 'archives'),
)
);
// Hier jetzt die eigentliche Spaw-Konfiguration fuer diese Ordner eintragen
SpawConfig::setStaticConfigItem('PG_SPAWFM_DIRECTORIES', $tmp_directories, SPAW_CFG_TRANSFER_SECURE);
/* Die Konfiguration komplett anzeigen lassen */
// var_dump($tmp_directories[4], $my_wyscnf, SpawConfig::configVar());
/* aufraeumen */
unset($tmp_directories, $tmp_pmxdir);
// $spaw_lang_data,
?>
Ist die so ok? Falls ja, dann ist sie genau wie in meiner anderen Installation
und da geht sie einwandfrei.
Bitte Rückantwort
Thx
Jörg
EDIT: Code als solchen gekennzeichnet.
pragmaMx Support Forum
